Retrotec DM32 Manual do Utilizador descarregar pdf (Página 41)

Page 41 of 94

©Retrotec Inc. 2014

4.8 Set up “Network” if using Ethernet connection

1. From the Home screen, tap [Settings] and then the […] key to get to the second “Settings” screen

2. Tap the [Network] key to enter the Network Settings menu.

3. From the “Network settings” screen, tap the [Status] key to cycle through different connection

types available between the gauge and the computer:

 “Disabled” (neither wired Ethernet nor WiFi network being used)

 “Wired” (Ethernet cable connected to the gauge)

If WiFi is enabled on your DM32, you will also see choices for:

 “WiFi-Create” to turn on the WiFi hotspot for phones and computers to find

 “WiFi-Join” to let the DM32 join an existing network

For information about using the gauge with a “Network” and for detailed instructions about further

settings required, refer to Section 5.

The “Status” should be set as “Disabled” if the gauge will be connected to the computer with a USB cable,

since this direct connection does not involve a network. If the USB cable is just being used for charging the

battery, the [Network] settings do not need to be changed.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 93 94

Sem comentários

Retrotec DM32 Manual do Utilizador Página 41